Locally Owned Australian Business with Shop Front and Online Store

E6000 Quick Hold Adhesive – 59ml / 2oz Clear

$15.99

In stock

EAN: 076818014027 SKU EQHA Categories , , , Tag Brand:
Share This:

Product Description

E6000 Quick Hold Adhesive

59ml Tube

• Thin viscosity – ideal for delicate applications
• Quick dry – sets in 2-3 minutes
• Dries clear
• Water resistant
• Paintable once cured

Quick HOLD is the perfect all-purpose craft adhesive with a thinner, quick dry formula. This makes it ideal for items requiring immediate movement. Quick HOLD will bond easily to metal, stones, crystals and lots more.

E6000 CAN NOT be moved by AIR. Your Parcel MUST be marked “ROAD ONLY”.

Instructions
Follow these simple step-by-step instructions when using Quick HOLD:

1. Quick HOLD should be used in a well-ventilated area.
2. Surface should be clean, dry and free from dirt.
3. Always test a small area to ensure proper application to achieve your desired result.
4. Apply Quick HOLD directly to each surface to be bonded or repaired. Allow it to harden for 5-10 minutes, before bringing surfaces together.
5. Allow the project to cure for 2-6 hours. Product can be used between 10°c and 32°c. Dry time decreases when used between 21°c and 32°c.
6. Water resistant immediately upon application. Resistant to petroleum, alcohol, paint thinner and most solvents.
7. Paint over Quick HOLD for UV resistance.
8. Keep thread at the neck of the tube free of Quick HOLD residue to avoid gluing the lid shut.
9. Store unused Quick HOLD at room temperature with cap tightened.

More Information

Quick HOLD takes 2 to 6 hours to fully cure, depending on the surrounding environment. Cure time will increase with lower temperatures and higher humidity, time will decrease at higher temperatures.
Small amounts of acetone may be used on uncured adhesive. The adhesive will ball up and brush off with ease. Cured adhesive may be removed by cutting or scraping.
Quick HOLD is water resistant immediately upon application. Use several thin coats to build a thick coating on the surface to be sealed, while allowing each layer to fully cure for 2 to 6 hours. This is especially useful on smooth surfaces such as plastic, glass or ceramics.
Once cured, Quick HOLD can withstand temperatures between -40°c to 66°c.